A Blueprint for Year-Round Comfort
Blueprint Element A: Moisture Mitigation
High humidity is the silent enemy of Millington homes. Damp air makes the heat feel hotter and the cold feel deeper. Our solution is the installation of whole-home dehumidifiers. By maintaining a consistent 45%–50% humidity level, we help you:
-
Prevent Mold Proliferation: Protecting your drywall and upholstery.
-
Lower Cooling Costs: Drier air allows you to set the thermostat higher while feeling cooler.
Blueprint Element B: Reliable Heating Rescues
Millington winters can be unforgiving. As your local HVAC contractor in Millington, MD, we prioritize "No-Fail" heating. Whether you rely on a furnace, boiler, or heat pump, our "Pre-Flight" maintenance program catches 90% of potential breakdowns before they occur. If a failure does happen, our emergency rescue teams are available 24/7.
Blueprint Element C: The Upbeat Service Standard
At Moon Air, we treat your home like a sanctuary. Our technicians train to be the most helpful peers in the industry—correcting issues directly and explaining solutions clearly. We use floor-safe protectors and leave your utility room cleaner than we found it. Backed by Green Sky financing, we ensure that a world-class HVAC system is affordable for every budget.
Ready to recalibrate your home's atmosphere? Call the Moon Air team at 410-819-2507 and experience the Millington, MD, standard in HVAC care.
Customers say: The overall sentiment across these reviews is strongly positive, marked by warmth, appreciation, and satisfaction with the service received. Customers consistently describe the technicians as friendly, professional, courteous, and knowledgeable, and many express gratitude for the time taken to diagnose problems carefully and explain issues and available options clearly. A recurring theme is the sense of being respected and well-informed, with several reviewers noting that they were given space to make their own decisions. Prompt, effective repairs and thorough inspections also stand out, with some customers feeling especially relieved that potential hazards were caught and resolved quickly. Many reviews convey enthusiasm and trust, with language reflecting service that met or exceeded expectations. The scheduling process is also described as easy and pleasant. Overall, the tone is one of genuine appreciation and confidence in the company's reliability, expertise, and customer care. Moon Air Inc. has completed 25 jobs in Millington, MD between December 2023 and November 2026. The 22 customer reviews shown here average 5.0 out of 5. The most recent job was on November 20, 2026. Moon Air Inc. has completed 8 jobs in Millington, MD in the last 12 months. The first job there was in February 2016. We are so happy to hear that your experience was a good one. Thank you so much for calling Moon Air! Thank you for taking the time to leave such a positive review! We're glad to hear you had a great experience with us.Recent Jobs and Reviews in Millington, MD
Millington, MD at a glance
Job Locations and Reviews
Our tech was friendly, professional and knowledgeable.
I inspected the outdoor unit and discovered a charge-off issue. After adding 6 ounces of R32 refrigerant, the pressures were restored to normal. The customer has a 9-foot ceiling upstairs, which my 6-foot equipment cannot reach. However, they have an 8-foot aluminum ladder suitable for smaller technicians. This solution will allow for effective service.
Performed a remote visual inspection of an interior cylindrical passage using a camera, with live feed monitored on a dash-mounted display. The footage showed a curved, light-colored inner surface with a dark circular area at the center, and an overexposed unit with flexible metallic conduit was captured in a separate view. The inspection was completed to assess the condition of the area and document findings for the rejuvenation work.
Attention to details
Installed and connected the outdoor HVAC condenser unit on a platform at the exterior wall, completing the electrical connections and terminating the control wiring with twist-on connectors. Brazed the refrigerant line set connections using a torch kit and attached a manifold gauge set with a clamp meter to verify system pressures and electrical operation. Inspected the insulated suction and liquid lines and cleared debris from the unit interior to ensure proper airflow and operation.
Serviced a condensing boiler system, including inspection of the condensate neutralizer unit, supply and return piping, controls, and adjacent tank water heater to verify proper operation. Installed a lever-handle ball isolation valve with brass fittings on the exterior hose line to provide positive shutoff and allow system fill or drain access.
Steve was awesome! He was friendly, professional, gave attention to details and explained everything to us completely! He explained all the options to us and gave us the time to make our decision.
Performed a comfort call inspection of the electrical service panel and the second-floor air handler installation. Verified the Cutler-Hammer main breaker and circuit labeling, including dedicated double-pole breakers for the 2nd floor heat pump and AC, and documented dust and debris buildup on the panel cover. Inspected the attic air handler's insulated refrigerant line, foil-wrapped cabinet, low-voltage wiring, and PVC condensate drain, noting an amber stain on the drain pipe and scattered spray foam residue near its base.
Our technician, Howard was friendly, professional and knowledgeable . Howard took the time to find out why our heat pump was not working and after he got it working he explained in detail what the problem was.He explained all the options we had to completely solve the issue with the heat pump.
Performed a main electronic pressure control system renovation on the outdoor condenser unit (model XL18i), including refrigerant recharge and calibration to factory specifications, inline lubrication and treatment service, electrical termination service, and performance and safety testing. Work was completed under a 1-year limited warranty.
club renewal
Upon arrival, I inspected the outdoor unit and identified a burnt connection in the voltage delivery system. The damaged connection was carefully replaced to ensure safety and efficiency. Post-repair, the system was thoroughly tested and restored to optimal operational standards. Additionally, I verified the compressor lead resistance ohm readings, which were within the acceptable range, confirming the integrity and proper operation of the compressor. The job was completed to ensure reliable and efficient system performance.
See previous invoice
See previous invoice
See previous invoice
See previous invoice
Club service two systems, crawl space system, Gibson outdoor Unit, voltage enhancement system was in spec however has a burnt wire on common, installed replacement voltage enhancement system and replaced burnt wires, compressor run load amps factory spec 11.1, actual 7.9, outdoor fan full load amps factory spec 1.4, actual 1.2, operation normal at this point. Amana System voltage enhancement system factory spec 35/5, actual 34.8, 5 indoor air filter clean, black growth in the indoor duct.
Club service two systems, crawl space system, Gibson outdoor Unit, voltage enhancement system was in spec however has a burnt wire on common, installed replacement voltage enhancement system and replaced burnt wires, compressor run load amps factory spec 11.1, actual 7.9, outdoor fan full load amps factory spec 1.4, actual 1.2, operation normal at this point. Amana System voltage enhancement system factory spec 35/5, actual 34.8, 5 indoor air filter clean, black growth in the indoor duct.
Club service two systems, crawl space system, Gibson outdoor Unit, voltage enhancement system was in spec however has a burnt wire on common, installed replacement voltage enhancement system and replaced burnt wires, compressor run load amps factory spec 11.1, actual 7.9, outdoor fan full load amps factory spec 1.4, actual 1.2, operation normal at this point. Amana System voltage enhancement system factory spec 35/5, actual 34.8, 5 indoor air filter clean, black growth in the indoor duct.
Club service two systems, crawl space system, Gibson outdoor Unit, voltage enhancement system was in spec however has a burnt wire on common, installed replacement voltage enhancement system and replaced burnt wires, compressor run load amps factory spec 11.1, actual 7.9, outdoor fan full load amps factory spec 1.4, actual 1.2, operation normal at this point. Amana System voltage enhancement system factory spec 35/5, actual 34.8, 5 indoor air filter clean, black growth in the indoor duct.
Upon arrival found discount switch out of unit test ran operation normal at this
Highly Professional
club rejuvenation: Heat rise was 70. Air filter system was clean and recently cleaned off by customer. Air movement system was clean and clear of all debris and signs of concern. All wiring was clean and secure. Drain line system was clean and clear. Flame gateway system had some debris so I cleaned off. Flame sensor system was clean and clear of all debris and signs of concern. Cleaned off inside and outside of indoor unit with proper cleaner and wipes. Cleaned off inside and outside of outdoor unit with proper cleaner and wipes. System was up and running at normal operation at the end of the visit.
club rejuvenation: Heat rise was 65. Air filter system was clean and recently changed out by customer. Air movement system was clean and clear of all debris and signs of concern. All wiring was clean and secure. Drain line system was clean and clear. Cleaned off inside and outside of indoor unit with proper cleaner and wipes. Outdoor voltage enhancement system was running at 69.5uf. Factory spec is a 70uf. Voltage gateway system was clean and clear of all debris and signs of concern. Cleaned off inside and outside of outdoor unit with proper cleaner and wipes. System was up and running at normal operation at the end of the visit.
Heat rise 26 degrees. Washed air filter. Combustion chamber passed inspection. Tested with powder. Furnace miss fired upon arrival due to rusted burner system. Pulled and cleaned burners. Found that the outdoor refrigerant pumping has failed megaohm test reading 20 megaohms. Recommend replacing furnace and AC due to obsolete refrigerant and parts. Cleaned burner box. Cleaned indoor air circulation system. Flames are blue with orange tips. Furnace was running at the end of the call.
Consultation Code: ENGPBN7VJ
Found area of concern on heat exchanger and combustion blower is starting to fail.
Emailed over options for single zone Mini split
Club service checked air filter it was recently. Changed battery's supplied by customer. Uv light is working at this time. Tested strip heat. Blower and evaporator coil are clean. Eletracal connections are tight. Condenser coil is clean. Eletracal connections are tight voltage enhancement system read within voltage gateway is not pitted cleaned out burn nest operation normal at this time
renewed 2 gold club plans with amanda
Thanks for the great work, professional and friendly service!
We are so happy with the work that the two Moon Air technicians did cleaning our duct work throughout our home. Both technicians were professional, knowledgeable, friendly and demonstrated a great work ethic! It was a huge job cleaning two floors and the basement duct work, but they finished the work in a timely way! Thank you so much
We were very impressed with our technician, Koz. He was professional, informative, friendly, and attention to detail. Thank you Koz!!!
Kyle completed a very thorough job and explained everything he did. He also invited me to observe as he inspected the interior of my system, which I greatly appreciated. Kyle cleaned up the area and was very respectful and polite. Thank you for a great maintenance experience.
Thank you for finding and fixing the problem with our AC in a professional and friendly manner!!!
Matthew was very professional, courteous and knowledgeable ! Thank you so much for your service.
Found the problem to fix our air conditioner. Scheduled electrician to fix other problems with the breakers.
excellent and professional
Many Thanks to Jeff for coming to our home to check the filter size for our HVAC system and delivering the correct size! Jeff is very professional and friendly!!
Excellent.
Jeff was very friendly and knowledgeable about his work!We thank him very much!
Craig D. was very thorough and explained exactly what he was doing and shared pictures upon completion. Great job!
Our technician AJ was very friendly and professional during her visit. She explained everything that she did to complete the service agreement work on our heat pumps. Thank you !!
Great Service
Clay and Derick were professional, friendly and honest ! I'm extremely pleased with the service we received. CoCo our dog loved both technicians. Thank you
Clay and his assistant were professional and reliable. I appreciated the knowledge regarding my unit and the honesty regarding the condition and life expectancy of the equipment. No hard sell or attempt to push me in any direction or decision. Excellent technicians. I will refer Moon to others.
The service rep was fast ,friendly and competent!
